AV-202 Multigrout is a polymer solution which cures when reacted with water. AV-202 reacts freely with water in any proportion to form a strong film, gel, or foam of polyurethane. AV-202 Multigrout's intended use would be to prevent water infiltration into sub-grade structures and pipes.

Used in:

• Precast structures

• Manhole and Pipe penetration

• Large cracks or joints in concrete

• Dams and reservoirs

Packaging:

• Tubes, 12 per case

• 1 Gallon

• 5 Gallon

• 55 Gallon Drum

Tech Spec

MSDS

AV-219 Fibrotite is a trade name for Avanti’s dry, twisted, jute oakum made in rope form without tar or oil.AV-219 Fibrotite is backed by laboratory and field research that has made it the highest in quality, ease of handling, and convenient to use.

Starts curing in 3 seconds! Packaged in a single caulking tube, Parts A & B travel through a simple static mixer to begin the reaction. Rapid expansion begins in 3 seconds to form a dense, firm, and impermeable foam that is tack-free within 25 seconds. AV-290 is designed to stop high volume leaks and because it is a hydrophobic polyurethane it does not need any water to react. This product contains no solvents, VOC's, CFC's, or HFC's. Nonflammable. Withstands wet/dry cycles.

Used in:

• Medium to fine cracks or joints in concrete

• manhole and Pipe penetrations

• Subways and tunnels

• Dams and reservoirs

Packaging:

• Tubes, 12 per case

• 5 Gallon Containers        (Part A & Part B)

Tech Spec

MSDS

AV-333 Injectaflex is a single-component urethane resin that reacts rapidly with equal proportions of water to form a flexible, impermeable foam with excellent adhesion to concrete and some plastics. AV-333 is a low viscosity chemical grout primarily injected into the area of leakage, creating a mechanical and chemical bond, as well as a compression seal.
 

Used in:

• Medium to large cracks or joints in concrete

• manhole and Pipe penetrations

• Tunnels, mines, culverts

• Dams and reservoirs

Packaging:

• 1 Gallon

• 5 Gallon

Tech Spec

MSDS

AV-310 Hydro Sealant is a standard viscosity hydrophilic polyurethane injection resin designed to control water and seal moving non-structural cracks in concrete. When AV-310 comes in contact with moisture, this nonflammable resin quickly expands to form a flexible closed-cell polyurethane foam. After curing it becomes an extremely tough and adhesive foam capable of withstanding excessive temperature changes and movement. AV-310 Hydro Sealant is an extremely effective water barrier.

Used in:

• Medium to large cracks or joints in concrete

• Subways and tunnels

• Tie-backs and slurry walls

Packaging:

• Tubes, 12 per case

• 55 Gallon Drum

Tech Spec

MSDS

AV-315 Micro Foam is a prepolymer resin which specializes in sealing leaks in fine cracks. AV-315 has an extremely low viscosity which reacts rapidly with even proportions of water to form resilient, impermeable foam with excellent adhesion to concrete and similar materials.

Used in:

• Fine cracks or joints in concrete

• Retaining walls

• Parking structures

• Tunnels

• Mines

Packaging:

• Tubes, 12 per case

• 1 Gallon

• 5 Gallon

Tech Spec

MSDS

AV-330 Safeguard resin reacts rapidly with water to quickly and safely seal leaks. AV-330 is a MDI-based hydrophilic urethane injection resin which is specifically designed to provide resilient, flexible foam capable of withstanding severe thermal cycles. AV-330 does not contain acetone or listed VOCs. Non-flammable.

Used in:

• Medium to large cracks or joints in concrete

• Stop infiltration through pre-cast joints in subways manholes, utility vaults,    large-diameter pipe or similar structures

• Tie-backs and slurry walls

• Manhole and pipe penetrations.
   

Packaging:

• 5 Gallon

Tech Spec

MSDS