 The A●LOK X●CEL Pipe to Tank Connector is a flexible connector specifically engineered to produce a positive watertight seal between a pipe entering a precast concrete septic tank and the tank itself. The A●LOK X●CEL connector is designed with a Patented “water pocket” which is energized by hydrostatic pressure provided by ground water. As the water table rises, the seal around the pipe actually becomes tighter. The system has been tested to 15 psi.
The Z●Lok C-104 -4 cast in boot style connector with THE "NEW"
takedown clamp design that travels from factory to job attached to
the connector. This eliminates one of the most often asked
questions" Where is the Takedown clamp?"
MATERIAL: The rubber connector is molded from EPDM formulated for wastewater applications and engineered to conform to the Resilient Material Requirements of section 4.1.1 of ASTM C-923. Nitrile compounds available upon request for hydrocarbon applications.
ADVANTAGES:
- The A●LOK X●CEL Connector functions on pure compression, making field installation quick and easy. Clean and lubricate both pipe and connector, center pipe in connector, and insert.
- Connector is capable of providing in excess of 10 degrees of omnidirectional deflection to resist shear caused by settlement or ground movement.
- Connector is cast-in with a one-piece hole former during the manufacturing process allowing it to become an integral part of the tank.
|
