FOAMING HAMMER HD
FOAMING HAMMER HD is a cleaning compound designed specifically to remove build-up from concrete hauling, handling and finishing equipment. It delivers acid-like power without the hazards, and it is non-corrosive and biodegradable.
- Heavy Duty Concrete Remover
- Foam on Equipment or Soak Tools in a Bath
- Green Product, Safe & Strong
- Non-Corrosive, Apply and Forget
- Apply and Forget
- Safer than Alternative Products
How it works
This cleaner utilizes state of the art surfactant technology and small molecular size to penetrate deep inside concrete residues and react from within. FOAMING HAMMER HD does not dissolve cement. It breaks the cement's chemical bonds and thus makes it easier to remove. The product of the reaction is a soft paste similar in consistency to tooth paste.
The reaction takes 15 to 30 minutes to break the calcium bonds to a depth of about one eighth of an inch, depending on the chemistry of the concrete. The concrete generally starts to turn white as the calcium is being removed from the cement.
Safer than acid based cleaners
This product does NOT contain muriatic, sulfuric, phosphoric, hydrofluoric or hydrochloric acids.
| FOAMING HAMMER HD | Acid based cleaners | |
|---|---|---|
| Chemistry | Organic salts and surfactants | Contains acid (HF, HCL) |
| Safety | Safe | Unsafe |
| Fumes | No fumes | Toxic fumes |
| Corrosivity | Non-corrosive | Corrosive |
| Disposal | Biodegradable | Hazardous waste |
| Shipping | No special labeling required | Special labeling and shipping required |
Where to use it
Because of its less corrosive nature, this product can be used on steel, aluminum, painted and plastic surfaces without any concern for etching or damage. Even sensitive engine components and radiators can be cleaned without fear of damage. Cables, wires and lights can be cleaned without damage, and it will not harm glass.
Use FOAMING HAMMER HD on concrete equipment, tools, steel or aluminum formwork, ready mix trucks, concrete pump trucks and telebelts.
Do not use FOAMING HAMMER HD on magnesium tools. It is safe on virtually all materials except concrete and group 2 metals: beryllium, magnesium, calcium, strontium, barium and radium.
How to apply
One application will remove light build-up. Moderate to severe build-up may require regular applications over a period of days.
FOAMING HAMMER HD is far more effective when applied as foam. If it is not applied as foam, you do not get a good surface dwell time and product is wasted as it runs off. It can be applied with a professional FOAMING HAMMER two gallon hand held, pump up, foaming sprayer, or an electric or air powered wall mounted foam applicator.
A stiff bristle brush or power washer can be used to clean off the softened concrete 15 to 30 minutes after application. Chemical reactions occur slower in cold temperatures, so it will take longer to work.
Sizes and equipment
A-LOK currently offers FOAMING HAMMER HD in 55 gallon drums and 275 gallon totes. Concentrated compound can be diluted and still obtain successful results.
Pump-up foam units are available in 1.3 and 2.6 gallon sizes, with a manual pump for portability, a comfortable grip handle with trigger for quick on and off control, an air gauge and pressure relief valve for safety, a Viton seal for chemical compatibility, and a natural colored tank for easy view of product level.
Frequently asked questions
Does FOAMING HAMMER HD eat or dissolve the cement?
FOAMING HAMMER HD does not dissolve cement. It breaks the cement's chemical bonds and thus makes it easier to remove. The product of the reaction is a soft paste similar in consistency to tooth paste.
Why wait 15 to 30 minutes?
Because FOAMING HAMMER HD does not dissolve cement, it takes 15 to 30 minutes to break the calcium bonds to a depth of about one eighth of an inch, depending on the chemistry of the concrete.
Will FOAMING HAMMER HD eat the metal, paint, wires or hoses?
FOAMING HAMMER HD is non-corrosive and is safe on materials, with the exception of magnesium or other metals in the same family as calcium. In contrast, traditional acids are dangerous and destroy almost all materials.
Why not use a brush to apply it?
If you use a brush to apply the product, a good portion of the product will fall off the brush and be lost on the ground. For use on equipment the best way to apply it is with a foam generating professional FOAMING HAMMER sprayer.
Can a regular sprayer be used instead of a foaming sprayer?
FOAMING HAMMER HD is far more effective when applied as foam. A regular pump sprayer cannot apply it as foam. The FOAMING HAMMER sprayer is made of thick plastic and is chemical resistant. Stationary, air and electrically powered systems are available if the hand held unit is not adequate for the job.
Why is there no smoke or visible reaction?
FOAMING HAMMER HD does not react like traditional acids. It safely breaks the cement bonds and makes it easy to remove the cement. The concrete generally starts to turn white as the calcium is being removed from the cement.
What happens if it gets on tires?
FOAMING HAMMER HD has an additive for rubber products to treat rubber and prevent drying and cracking that traditional acids cause. Tires will look clean and matte black like when they were new.
What if it gets on a windshield, windows, headlights or other glass?
FOAMING HAMMER HD will not harm glass and is excellent for removing the cement from these materials, thereby reducing the safety hazard that cement buildup causes.
Why did it not take off all of the thick buildup?
FOAMING HAMMER HD breaks down one eighth of an inch of cement at a time. More than one treatment may be required to initially clean a piece of equipment. It will inhibit future build up and future cleaning will be much easier.
Can it be left on equipment or tools overnight?
FOAMING HAMMER HD can be left on all night. This is actually a recommendation. Foam the equipment or tools at the end of the workday and walk away. Do not use FOAMING HAMMER on magnesium.
Why does it need to be re-wet?
Once FOAMING HAMMER HD dries it is deactivated. Misting it with water will reactivate it.
What about environmental hazards?
FOAMING HAMMER HD is non-corrosive, biodegradable and considered to be a green product.
Put FOAMING HAMMER HD to work on your equipment
Safer than Alternative Products